High Performance Multiservice Metro Router

The Ribbon NPT 2700 is a high-performance, multi-service router optimized for high-capacity metro aggregation. Whether its IP/MPLS, SR-TE, FlexE and IPoDWDM, the NPT 2700 uses the right IP transport technology for each service it supports. It offers a unique “pay-as-you-grow” architecture, allowing switching capacity to be easily and dynamically added when needed. Scalable capacity and a fully redundant design make the NPT 2700 ideal for all networks requiring a high-availability networking solution.

NPT 2700 Datasheet

NPT 2700 Overview

The NPT 2700 provides a unique “pay-as-you-grow” architecture, with up to 8T switching capacity which can be built-up dynamically in steps of 2T, without the need to install the full switching capacity of 8T upfront, as is the case in traditional high capacity platforms based on Clos architecture. A choice of I/O slots, and optical transceivers (including 100G , 200G and 400G coherent interfaces with ZR/ZR+ applications) make the NPT 2700 ideal for high-capacity metro aggregation and transport.

With a rich set of IP routing features and capabilities combined with carrier-grade service assurance, visibility, and control the NPT 2700 is truly multiservice, optimizing the end-to-end delivery of each service whilst meeting the service performance requirements for each service, on a service by service basis. A full set of optical interfaces including 400G ZR/ZR+ coherent optical pluggables, allows the NPT 2700 to support both single layer, hop-by-hop IPoDWDM and multilayer IP and Optical transport.

NPT 2700 Benefits and Features

Service-Aware Multiservice

High Performance

High-Availability

Pay-As-You-Grow

NPT 2700 Product Specification Highlights

Download NPT 2700 Datasheet

Performance	Switch capacity: 8T@4000Mpps 2T packet switching capacity per card
Physical Specification	7RU, 448mm(W) x 700 mm(D) x 307mm(H)
Routing Capabilities	Layer 3, Layer 2, IP/MPLS, RSVP-TE, MPLS-TP, SR-TE, Multicast
Services	L2VPN - MEF 3.0, Ethernet Virtual Private Network (EVPN), L3VPN, Circuit Emulation Services (CES); SAToP, CESoPSN, CEP
High Availability	Full redundancy for high resiliency (switch/control/power/fan)
IPoDWDM	CWDM,DWDM,100G/200G/400G coherent interfaces, ZR and OPENZR+ application, QSFP_DD for 100/200/400G
OAM	Streaming Telemetry, sFlow, ZTP, TWAMP, Ethernet OAM, IP OAM, MPLS-TP OAM, MPLS OAM, RFC 2544, Y1564, Generator, Y.1564, Link Delay Measurement, LLDP, DJCP
Manageability	CLI, LCT, SNMP MIB, NETCONF/gRPC, YANG models (OpenConfig, IETF), Muse, LightSOFT, ZTP
Operating Environment	-5°C to +50°C (23°F to 122°F)

Continued in NPT 2700 Datasheet

Request an IP Optical Quote

NPT Product Family

NPT IP Routers

Metro Routers Products

Product	NPT 2400	NPT 2700
Fit	High Performance Metro Edge and Aggregation	High Performance Metro Networks
Capacity	4.2T	8T
Service	Ethernet, Layer 2 VPN, EVPN, Layer 3 VPN, IP/MPLS, MPLS-TP, Segment Routing	Ethernet, Layer 2 VPN, EVPN, Layer 3 VPN, IP/MPLS, MPLS-TP, Segment Routing
Rack Units	2RU	7RU (scalable in 2T increments)
	NPT 2400	NPT 2700